TOSH-1 PALLET CONVEYOR PLATFORM

TOSH-1 Timing Belt Pallet Conveyor

TOSH-1 is a modular timing belt pallet conveyor, also referred to in the Toshine product catalog as a synchronous belt conveyor, designed for controlled workpiece-carrier transport between automated production and process stations.

Configured around the workpiece, pallet, process sequence and production-line layout.

  • TIMING BELT
  • WORKPIECE PALLET
  • MODULAR TRANSFER
  • PROCESS INTEGRATION
TOSH-1 timing belt pallet conveyor with aluminum frame and end drive
TOSH-1 timing belt pallet conveyor

PRODUCT OVERVIEW

Controlled Pallet Transfer Between Process Stations

TOSH-1 transports pallets or workpiece carriers on a high-strength aluminum profile structure. It supports accumulation conveying and is available with end-drive or center-drive arrangements. Compatible curve, transfer, positioning, lifting and rotation modules can be evaluated around the production flow.

  1. Workpiece
  2. Pallet / Workpiece Carrier
  3. Timing Belt Conveyor
  4. Stop / Position
  5. Assembly / Inspection / Testing
  6. Transfer to Next Station

SYSTEM ANATOMY

How the TOSH-1 Platform Works

The following elements provide pallet support, motion and structural integration.

TOSH-1 timing belt conveyor sections with drive motors, guide rails and pallet transport tracks
Drive and conveyor construction detail
  1. Timing Belt

    Provides the conveying interface for stable pallet movement.

  2. Workpiece Pallet

    Carries the workpiece and can be configured around the fixture and process requirements.

  3. Aluminum Profile Frame

    Provides a modular structural platform for conveyor and automation integration.

  4. Drive Arrangement

    End-drive or center-drive arrangement can be selected according to conveyor layout.

  5. Conveyor Direction

    Moves the pallet between process stations as part of the production flow.

CONFIGURATION

Configured Around the Workpiece and Process

Review these interfaces when configuring the conveyor section.

Parallel conveyor belt tracks with cross supports and an end shaft

Timing Belt

Provides the conveying contact used to move the pallet through the conveyor section.

Workpiece pallet supported across parallel belt conveyor tracks

Workpiece Pallet

Supports the workpiece and its fixture while providing the carrier interface to the conveyor.

Conveyor drive component illustration showing a transverse shaft and side housing

Drive Arrangement

End Drive or Center Drive can be evaluated according to the conveyor layout and section arrangement.

Aluminum structural profile showing its slotted cross section

Aluminum Profile Frame

Forms the structural base for the conveyor section and surrounding automation interfaces.

Pneumatic stopper mounted beside a belt conveyor track

Stop & Positioning

Supports controlled pallet release and location at a process station when the application requires it.

Pallet conveyor transfer assembly with orange arrows illustrating transfer directions

Transfer Integration

Connects conveyor sections, process directions or adjacent handling functions within the material flow.

DRIVE CONFIGURATION

End Drive and Center Drive Configurations

TOSH-1 can be configured with either end drive or center drive depending on conveyor length, layout and equipment arrangement.

TOSH-1 conveyor with motor and drive at the end
End-drive arrangement

End Drive

Motor and drive assembly positioned near the end of the conveyor section.

TOSH-1 conveyor with drive positioned within the section
Center-drive arrangement

Center Drive

Drive assembly positioned within the conveyor section to support different layout and installation requirements.

TECHNICAL CONFIGURATION

Verified TOSH-1 Configuration Range

Catalog values define the available product range. Final selection remains application-dependent.

ModelTOSH-1
Conveyor TypeSynchronous Belt Pallet Conveyor
Conveyor Length400–6000 mm
Pallet Width160–1200 mm
Conveying HeightAs Needed
Conveyor SpeedMax. 20 m/min
Maximum Load Capacity60 kg
Drive ConfigurationEnd Drive / Center Drive
Motor PositionConfigured according to conveyor arrangement
Motor DirectionConfigured according to conveyor arrangement
Noise≤60 dB at rated speed

Reverse operation is possible, but conveying capacity is reduced compared with forward operation. Forward conveying is recommended for normal system design.

Final configuration is determined according to the workpiece, pallet, payload, process sequence, cycle requirements and production-line layout.

SELECTION FORMAT

How to Specify Your TOSH-1 Conveyor

TOSH-1 / L / W / H / V / Motor Position / Motor Direction

Catalog example:

TOSH-1 / L2340 / W320 / H900 / V12 / OP / F1
L2340
Conveyor length: 2340 mm
W320
Pallet width: 320 mm
H900
Conveying height: 900 mm
V12
Conveyor speed: 12 m/min
OP
Motor position
F1
Motor direction

Final configuration should be confirmed according to the pallet, workpiece, production process and line layout.

ENGINEERING DRAWING

Dimensional Description

Final dimensions depend on conveyor length, pallet width, conveying height and drive arrangement.

TOSH-1 dimensional drawing with side, end and plan views
TOSH-1 dimensional drawing — open full size

FUNCTIONAL MODULES

Build More Than a Straight Conveyor

TOSH-1 conveyor sections can be combined with pallet handling modules to create application-specific material flow. Module selection is evaluated for each configuration.

Pallet direction-change module with curved belt path and guide rollers
Pallet direction-change module; compatibility is evaluated for each configuration.
TOSH-FC90 forced curve unit with perpendicular conveying tracks, drive motors and support frame

TOSH-FC90 · 90° Forced Curve Unit

Changes pallet travel direction by 90°.

TOSH-DC90 round belt curve unit with a quarter-circle path, guide rollers and support legs

TOSH-DC90 · 90° Round Belt Curve Unit

Provides a 90° pallet direction change using a round-belt curve mechanism.

TOSH-DC180 round belt curve unit with a semicircular pallet return path and support legs

TOSH-DC180 · 180° Round Belt Curve Unit

Provides a 180° pallet return / direction-change path.

TOSH-LT30 lift and transverse shift unit with a vented top cover and side transfer rails

TOSH-LT30 · Lift & Transverse Shift Unit

Transfers a pallet laterally by 90° between conveyor directions.

  • Pallet width: 160–480 mm
  • Pallet length: 160–480 mm
  • Speed: Max. 20 m/min
  • Pallet + load: ≤30 kg
TOSH-LP30 lifting positioning unit with a locating plate, guide pins and lifting supports

TOSH-LP30 · Lifting Positioning Unit

Raises and positions the pallet at a process station.

  • Pallet width: 160–480 mm
  • Pallet length: 160–480 mm
  • Rated stroke: 10 / 17 mm
TOSH-LI30 vertical lifting unit with an aluminum frame and guided lifting platform

TOSH-LI30 · Lifting Unit

Moves pallets vertically between conveyor levels.

TOSH-RT30 rotation shifting directional unit with a framed transfer mechanism

TOSH-RT30 · Rotation Shifting Directional Unit

Rotates pallets for directional changes within the pallet handling system.

SYSTEM FLOW

Configure TOSH-1 Around Your Production Process

Arrange compatible transport, transfer and positioning functions in the required process sequence.

  1. TOSH-1 Conveyor
  2. Direction Change
  3. Lift & Transfer
  4. Positioning
  5. Process Station
  6. Lift / Rotation
  7. Pallet Circulation

APPLICATIONS

Designed for Multi-Station Production Processes

Application evaluation starts with the process operation and required workpiece movement.

Long timing belt conveyor sections with aluminum frames and drive motor on the production floor
Timing belt pallet conveyor sections arranged for workstation integration.
01

Electronics

Pallet transport between assembly, inspection and testing processes.

02

Small Household Appliances

Workpiece-carrier movement through multi-station assembly processes.

03

Automotive Components

Controlled component transfer between automated production stations.

04

Automated Assembly

Pallet-based workpiece movement through sequential production processes.

PLATFORM SELECTION

Is TOSH-1 the Right Pallet Conveyor for Your Project?

Toshine has different pallet conveyor platforms for different workpiece, payload and process requirements.

TOSH-1

Timing Belt Pallet Conveyor

SELECTION DIRECTION

Controlled transfer for compact workpiece carriers and multi-station automation.

CURRENT PRODUCT
TOSH-2

Chain Pallet Conveyor

SELECTION DIRECTION

Chain-based pallet transport for broader assembly-line applications.

TOSH-4

Heavy-Duty Chain Pallet Conveyor

SELECTION DIRECTION

For applications requiring a more robust chain conveyor platform.

TOSH-5

Pallet Roller Conveyor

SELECTION DIRECTION

Roller-based pallet transport for suitable pallet and workpiece configurations.

Compare Pallet Conveyor Platforms

PROJECT INPUTS

What We Need to Evaluate Your Application

01

Workpiece

Dimensions and characteristics

02

Pallet / Carrier

Existing pallet or required carrier concept

03

Payload

Workpiece + fixture + pallet

04

Process

Assembly, testing, inspection or other operations

05

Layout

Straight, loop, transfer or multi-section arrangement

06

Cycle Requirement

Required production flow / takt considerations

07

Positioning

Required stopping and locating functions

08

Controls & Interface

Integration requirements with surrounding automation

ENGINEERING FAQ

TOSH-1 Questions, Answered.

Application-oriented answers without assumed performance values.

What is a timing belt pallet conveyor?

It is a conveyor platform that moves a pallet or workpiece carrier on timing belts between production stations. The carrier supports the workpiece while the conveyor provides the transport path.

When should I choose TOSH-1?

TOSH-1 can be evaluated when controlled pallet transfer is required for compact workpiece carriers and multi-station automation. Final selection depends on the payload, carrier interface, process, layout and cycle requirements.

Can the workpiece pallet be customized?

The pallet or carrier concept can be configured around the workpiece fixture and process requirements. Its final design requires review of the workpiece, support points, process access and conveyor interface.

Can TOSH-1 integrate stopper and positioning units?

Stop and positioning functions can be considered where a process station requires controlled pallet release or location. The required function and station interface must be evaluated for the application.

Can TOSH-1 connect with transfer or direction-change modules?

Transfer and direction-change functions can be considered as part of the material-flow layout. Compatibility and configuration depend on the pallet, route and required movement.

What is the difference between end drive and center drive?

They describe the location of the drive arrangement within a conveyor section. Selection depends on the conveyor layout and section configuration; performance differences should be confirmed during project engineering.

What information is required to configure a TOSH-1 conveyor?

Provide the workpiece, pallet or carrier, total payload, process sequence, layout, cycle requirement, positioning functions and automation interfaces where available.

PROJECT DISCUSSION

Discuss Your TOSH-1 Application

Share the available workpiece, carrier, conveyor and production-line information to start an engineering discussion. Not every item is required before inquiry.

  • Workpiece dimensions and weight
  • Pallet / carrier dimensions
  • Required conveyor length
  • Conveying height
  • Required speed or cycle time
  • Production process
  • Layout drawing
  • Transfer / positioning functions
  • Machine or station interfaces
Prepare Your Project Inquiry

Share the available information below. Items that are still open can be reviewed during the engineering discussion.

  • Workpiece dimensions and weight
  • Pallet / carrier dimensions
  • Required conveyor length
  • Conveying height
  • Required speed or cycle time
  • Production process
  • Layout drawing
  • Transfer / positioning functions
  • Machine or station interfaces

Send your requirements to info@sytoshine.com or visit our contact page. Online form submissions are not yet enabled.